Ajedium™ Films

Advanced Technologies in High-Performance Film Manufacturing

A full spectrum of high performance and developmental thermoplastics films for specialized industries. Made from a variety of engineering and fluorine-based polymers, these films may be mono- or multi-layer structures to meet the most demanding specifications.

Full Spectrum of High Performance Films

  • Imides (PI, PEI)
  • Ketones (PEEK - crystalline and amorphous, PEKK)
  • Sulfones (PSU, PES, PPSU)
  • Fluoropolymers (PVDF, ECTFE, ETFE, THV)
  • Specialties (PPS, PMP, PBT)
  • Alloys and Blends (PC/PET, PPE/PS)
  • Low residual stress and shrinkage
  • Process temperatures up to 1000°F (540°C)
  • ISO 9001:2008 Registered


Tolling, Contract Manufacturing & Development

  • Use of our advanced system and personnel for your specific needs
  • Co-operative engineering and development work on site
  • SPC reporting on custom runs available
  • Private labeling/packaging available
  • Contract slitting available


Custom In House Manufacturing

  • Flat-die extrusion of monolayer and multi-layer films (co-extrusion)
  • Thickness capabilities of 1/4 mil (6 microns) to 1/16"" (1.5mm)
  • Width capabilities up to 62"" (1575 mm)
  • Slit rolls and sheets available on custom quotation


Structures include mono-layer, multi-layer (co-extrusion), and in-line laminated (extrusion coating) structures to meet demanding customer requirements.

Thermoplastic films may be produced via flat die extrusion and coextrusion, in-line lamination (extrusion coating), private labeling/packaging, contract slitting.

Technical Data Sheets

Ajedium™ Films Technical Data Sheets
AvaSpire® AV-630Similar to the high strength and chemical resistance of PEEK, but with higher ductility.
Halar® 500LCKey Halar® ECTFE film properties include extremely resistant to UV radiation and low permeability to water and oxygen.
KetaSpire® KT-820KetaSpire® PEEK films have high temperature resistance, excellent chemical and fatigue and strength properties.
PEI (polyetherimide)PEI films have good balance of thermal, mechanical and electrical properties.
PolyimideThe highest temperature and excellent chemical and radiation resistance.
Radel® R-5100 NT15Radel® PPSU films are extremely tough and inherently flame retardant.
Solef® PVDF 9009Solef® PVDF films have a relatively low coefficient of friction, and excellent outdoor UV resistance.
Udel® PSU P-1700 NT-11Udel® PSU films are highly resistant to acids, alkali and salt solutions, with a practical toughness and strength.
Veradel® PESU 201 NTVeradel® PESU 201 NT polyethersulfone is a tough, high-strength thermoplastic that is suitable for continuous use up to 180°C (356°F).

Typical Properties

Solvay manufactures a wide spectrum of over 65 high performance thermoplastic films based on the following engineering and fluorine polymers:

  • Tg=157 °C 
  • High strength 
  • High durability 
  • Excellent chemical resistance 
  • Good radiation resistance 
  • Low smoke emission 
  • Low flammability
  • Very high melting temperature: 343 °C (Tg = 143 °C) 
  • Excellent environmental resistance 
  • Excellent wear resistance 
  • Excellent creep, fatigue and modulus 
  • Radiation resistance 
  • Low flammability 
  • Low smoke emission
  • Tg = 218 °C 
  • High strength and rigidity 
  • Low smoke generation 
  • Excellent electrical properties 
  • Good chemical resistance 
  • Excellent hydrolysis resistance
  • Tg = 220 °C 
  • Self-extinguishing 
  • Stable over a wide range of temperatures 
  • Little smoke when burned 
  • Good hydrolysis resistance 
  • Good chemical resistance
Polyphenylene sulfide
  • High temperature resistance (Tm = 280 °C; Tg = 90 °C) 
  • High strength and stiffness 
  • High chemical resistance 
  • High LOI (47) 
  • Suffers from brittleness 
  • Good hydrolysis resistance 
  • Low water absorption
  • Tg = 220 °C 
  • Fire resistant 
  • Good electrical properties 
  • Good chemical resistance 
  • High heat distortion temperature 
  • High strength and stiffness
  • Tg = 185 °C 
  • Self-extinguishing 
  • Good electrical properties 
  • Good chemical resistance 
  • High heat dist. temperature 
  • High melt viscosity
Polyvinylidene fluoride
  • High strength and rigidity 
  • High dielectric constant 
  • Very good chemical resistance 
  • Very good weatherability 
  • Mostly transparent (mainly copolymers) 
  • Very low surface tension
Thermoplastic polyimide
  • Tg=240 °C 
  • Superior radiation resistance 
  • Excellent chemical resistance 
  • Excellent wear performance 
  • High tear resistance 
  • Good electrical properties 
  • Good flame resistance