Fomblin® PFPE - FAQ

Frequently Asked Questions

What is Fomblin® PFPE?

The trade name Fomblin® PFPE identifies a family of synthetic lubricants entirely composed of carbon, oxygen and fluorine, belonging to the class of perfluoropolyethers. They are produced by Solvay Specialty Polymers through a proprietary and versatile technology: the low temperature reaction of oxygen with perfluorinated olefins activated by UV light. This platform allows to obtain different structures in a wide range of molecular weights. Key properties such as viscosity and vapor pressure can therefore be tailored to the target application. They are clear, colorless and odorless oils that remain liquid in a very wide range of temperatures, spanning from –100 °C up to 300 °C. Fomblin® PFPEs are thermally stable, chemically inert, and compatible with metals, hydrogenated polymers, oxygen and aggressive gases even at very high temperatures.

They are not flammable and non-toxic. They have low vapor pressure, good dielectrical properties, low refractive index and low surface tension.

When critical applications have to be addressed where aggressive chemical environment, high temperatures or wide working-temperature ranges are involved they represent the lubricants of choice.

Fomblin® PFPE oils can be thickened with polytetrafluoroethylene (PTFE) to give white and homogeneous lubricating greases of different consistency.

What is the Difference Between Fomblin® Y and Fomblin® M/Z?

Fomblin® Y and Fomblin® M/Z perfluoropolyether fluids are produced starting from different monomers, hexafluoropropene and tetrafluoroethylene respectively, and for this reason they have different chemical structures:

Fomblin® Y

Fomblin-Y-chemical-structure-350px

Fomblin® M/Z

Fomblin-M-Z-chemical-structure-350px

Fomblin® M/Z oils have excellent viscosity indexes, very low evaporative losses, excellent low-temperatures properties and good thermal stability.

Fomblin® Y oils are characterized by excellent thermal stability, good viscosity index, good low-temperature properties and low evaporative losses.

What Makes Fomblin® PFPE Lubricants Better?

The following combination of properties and characteristics makes for sure Fomblin® PFPE the right product for your application:

  • Excellent chemical and solvent resistance
  • Excellent thermal resistance
  • Excellent electrical resistance
  • Non-reactive with metal, plastic, elastomers and rubber
  • Inert to liquid and gaseous oxygen
  • Excellent radiation hardness
  • From good to outstanding (> 300) viscosity index depending on the grade
  • Non-flammable
  • Extremely wide operating temperature
  • From low to extremely low evaporation loss depending on the grade
  • Excellent properties at low temperatures, starting torque for example, depending on the grade
  • Excellent water washout properties
  • Good low and high temperature wear properties
  • Easily formulated into greases
  • Environmentally safe
  • Zero ozone depletion potential
  • No volatile organic chemicals
  • Non-toxic

What are the Applications where Fomblin® PFPE Lubricants are Top Performers?

Fomblin® PFPE lubricants and their formulations into greases are successfully employed in all the industries in need of high performance lubrication like chemical, electronic, military, nuclear and data processing.

Examples of uses of Fomblin® PFPE lubricants include:

  • Tenter frames in the textile industry
  • Deep space rocket nozzle lubrication
  • Missile catapult system lubrication
  • Sintered metal bearings requiring exceptional operating life
  • Anti-lock braking systems
  • Oxygen and chlorine valves and pumping systems
  • Sealing fluids for vacuum pumps
  • Gold contact surface lubrication
  • Nuclear industry lubricants
  • Instrument lubricants
  • Lifetime sealed, maintenance-free bearings
  • Lubricants for gasoline tank floats
  • Bearings exposed to high temperatures, moisture and aggressive chemicals

Can Fomblin® PFPE be Used in a Clean Room Environment?

The complete spectrum of vacuum needs, low/medium/high, is covered by a selection of Fomblin® PFPE oils’ grades. More in detail, Fomblin® Y LVAC are grades designed for vacuum pumps as sealing and working fluids in the presence of aggressive gases. Fomblin® HVAC are the products of choice for high vacuum applications (10–3 mbar to 10–7 mbar) since they combine narrow molecular weight distribution and controlled viscosity with an extremely low vapor pressure.

Can Fomblin® PFPE be Used in Medical Applications?

Fomblin® PFPE products have not been approved for medical applications involving permanent or temporary implantation in the human body or permanent or temporary contact with internal body fluids or tissues.

Is Fomblin® PFPE Pressure Sensitive?

The performance of Fomblin® PFPE lubricants is unaffected by pressure. Their viscosity increases under pressure and they compress slightly. The viscosity of Fomblin® Y shows a more pronounced dependence on pressure compared to Fomblin® Z. This is due to the different chemical structure and in particular to the presence of the bulky – CF3 pendant group in the chain of Fomblin® Y. The figure below shows variation of the viscosity with pressure, measured at 30 °C in the range 3 – 10 MPa for a Fomblin® Y and a Fomblin® Z having comparable viscosity of 250 cSt at 20 °C.

Fomblin® PFPE viscosity vs. pressure chart

Fomblin-PFPE-viscosity-pressure-600px

What is the Recommended Temperature Range for Use of Fomblin® PFPE?

Fomblin® PFPE oils can be used from – 90 °C up to 290 °C depending on the grade. Fomblin® PFPE doesn’t burn or carbonize to form tarry deposits thus avoiding a typical cause of equipments failure at very high temperature. The only modification you may observe is a light evaporation of the oil. Our wide selection of products allows minimizing this effect by matching application requirements and oil profile. Fomblin® PFPE oils are designed to provide lubrication also when heating and vacuum are combined, conditions under which conventional oils would be vaporized leading to contact metal counterfaces seizure.

What is the Density of Fomblin® PFPE?

The density of Fomblin® PFPE oils is approximately twice that of standard lubricants; it is comprised between 1.8 and 1.9 kg/liter depending on the grade. This has to be taken into account when filling bearings by weight. The typical dependence of density on temperature for two grades of Fomblin® Y and Fomblin® M having similar viscosities at 20 °C is shown in the figure below.

Fomblin® PFPE density vs. temperature chart, ASTM D4052

Fomblin-PFPE-density-vs-temperature-600px

What is the Pour Point of Fomblin® PFPE?

Fomblin® PFPE oils are able to flow down to extremely low temperatures, having pour points as low as – 90 °C in the case of Fomblin® M/Z. Typical values are shown in the table below.

Fomblin® PFPE pour point, ASTM D97
Fomblin® YY04Y06Y25Y45YRYPL1500YR1800
Pour point [°C]–58–50–35–30–25–25–20
Fomblin® MM03M15M30M60M100  
Pour point [°C]–85–75–65–60–50  
Fomblin® ZZ03Z15Z25Z60   
Pour point [°C]–90–80–75–63   

What is the Viscosity Range and Viscosity Index of Fomblin® PFPE?

Fomblin® PFPE lubricants cover a wide viscosity range and are characterized by very good Viscosity Index (VI), varying from 60 to 350 depending on the grade. High VI means slow change of viscosity with temperature and, consequently, a wider operating temperature range. The effective viscosity of a lubricant in a bearing may be different from the quoted viscosity measured by a standard test method. This difference depends on the actual shear rate in the bearing that can be higher compared to conditions typical of test methods. Fomblin® PFPE oils display Newtonian behavior, e.g. their viscosity remains constant up to shear rate as high as 106 s–1.

Typical values are reported in tables 2 – 4 for Fomblin® Y, M and Z. Figures 3 – 5 show viscosity temperature relationship.

Fomblin® Y kinematic viscosity (ASTM D445) and viscosity index (ASTM D2270)
PropertyY04Y06Y25Y45YRYPL1500YR1800
Kinematic Viscosity (cSt)20 °C38602504701,3001,5001,850
40 °C152280147345420510
100 °C3.24.11016334047
Viscosity index6073108117135144148

Fomblin® Y viscosity vs. temperature chart

Fomblin-Y-viscosity-vs-temperature-600px


Fomblin® M kinematic viscosity (ASTM D445) and viscosity index (ASTM D2270)
PropertyM03M15M30M60M100
Kinematic Viscosity (cSt)20 °C301502805501,300
40 °C1785159310700
100 °C5224586200
Viscosity index253286338343384

Fomblin® M viscosity vs. temperature chart

Fomblin-M-viscosity-vs-temperature-600px


Fomblin® Z kinematic viscosity (ASTM D445) and viscosity index (ASTM D2270)
PropertyZ03Z15Z25Z60
Kinematic Viscosity (cSt)20 °C30160263600
40 °C1892157355
100 °C5.6284998
Viscosity index291334350350

Fomblin® Z viscosity vs. temperature chart

Fomblin-Z-viscosity-vs-temparature-600px

Is Fomblin® PFPE Flammable?

No. Fomblin® PFPE is not flammable. It doesn’t have a flash, fire or autoignition point. Fomblin® PFPE fluids are Factory Mutual Underwriters Approved.

Fomblin-PFPE-FM-certificate

Is Fomblin® PFPE Radiation Resistant?

Fomblin® PFPE has a good resistance to radiations. It can be used for the lubrication of gears in UF6 ultracentrifuges.

Does Fomblin® PFPE Oxidize?

The structure of Fomblin® PFPE, thanks to the presence of fluorine, is highly stable and inert. For this reason Fomblin® PFPE does not oxidize unlike hydrocarbons and other synthetic lubricants.

Is Fomblin® PFPE Hazardous?

No. Fomblin® PFPE are very safe fluids:

  • No flash or fire point
  • No explosion hazard
  • No toxicity
  • No autoignition point
  • Thermal, oxidative and chemical stability
  • Shelf life over 20 years

Fomblin® PFPE fluids are chemically inert and thermally stable up to 300 °C. Some of the decomposition products are potentially dangerous. Fomblin® PFPE do not react with chemicals and refrigerants and do not get oxidized.

What are the Electric Properties of Fomblin® PFPE?

Fomblin® PFPE fluids are dielectric materials. They have low dielectric constant (typical value 2) and high volume resistivity (typical value 1·1015 ohm·cm).

Is Fomblin® PFPE Compatible with Various Materials?

Fomblin® PFPE oils are compatible with all types of polymers, plastomers and elastomers. Nitrile, butyl, polyfluorosiloxane, EPDM rubber don’t show any sign of swelling or mechanical or physical alteration after prolonged contact with Fomblin® PFPE. Melamine, phenolic, polyoxymethylene, and polyolefin resins can be used in combination with Fomblin® PFPE up to their limit of operational range. Fomblin® PFPE lubricants are compatible with glass, ceramics and metals. They can be used with water, oils vapor and in general with all organic compounds and not-highly-fluorinated solvents without being removed, dissolved or modified in any way. Compatibility data of Fomblin® PFPE lubricants are shown in the tables below. Specific compatibility tests according to standard methods can be performed upon request.

Fomblin® PFPE compatibility with chemical agents
MaterialTemperatureTest ConditionResult
Hydrogen halides
HF, HCl, HBr200 °C1 l/h; 24 hUnchanged
Halogens
Cl2, Br2, F2200 °C1 l/h; 24 hUnchanged
Non-metal halides
BF3, BCl3, SbCl3, UF680 °C5 % (w/w); 24 hUnchanged
PBr3, PCl5150 °C5 % (w/w); 24 hUnchanged
SiCl4, SiHCl3150 °C1 l/h; 24 hUnchanged
Sulphur anhydrides
SO2, SO3200 °C1 l/h; 24 hUnchanged
Mineral acids
Conc. H2SO4, HNO3, H3PO470 °C50 % (w/w); 24 hUnchanged
Alkalis
KOH, NaOH, Na2CO3200 °C20 % (w/w)Unchanged
Aqueous oxidizers
KMnO4 (6 % w/w)70 °C50 % (w/w); 24 hUnchanged
K2Cr2O7 (10 % w/w)70 °C50 % (w/w); 24 hUnchanged
Organic solvents
Hydrocarbons20 °C50 % (w/w)Unchanged
Alcohols20 °C50 % (w/w)Unchanged
Ethers20 °C50 % (w/w)Unchanged
Esters20 °C50 % (w/w)Unchanged
Amides20 °C50 % (w/w)Unchanged
Ketones20 °C50 % (w/w)Unchanged
Acids20 °C50 % (w/w)Unchanged

Internal method; unchanged means no change in acid number and viscosity change ± 2 %


Fomblin® PFPE compatibility with vulcanized rubbers
 Volume Increase [%]Tensile Strength Retained [%]Elongation Retained [%]Hardness Change Points
Fomblin® Y
Natural rubber2106125–3
1,4-cis-polybutadiene883107–3.5
Styrene butadiene rubber0.8104138–2
Polychloroporene–0.51151180
Butadiene-acrylonitrile rubber–0.395103+4.5
Ethene propylenediene terpolymer–0.3114120+0.5
Fomblin® M
Natural rubber0.19190–3
1,4-cis-polybutadiene0.17170–1
Styrene butadiene rubber0.17476+2
Polychloroporene0.497103–2
Butadiene-acrylonitrile0.110194–2
Ethene propylene-diene0.3108104–3

ASTM D471, 70 °C, 166 hrs, on grades having viscosity of 250 cSt at 20 °C


Fomblin® PFPE compatibility with plastomers
PlastomerResults
Polyphenylene oxideUnchanged
Polyethylene-terephthalateUnchanged
Polybutylene-terephtalateUnchanged
PolystyreneUnchanged
Polyethylene low densityUnchanged
Polyethylene high densityUnchanged
PolypropyleneUnchanged
Acrylonitrile-styrene-copolymerUnchanged
PolymethylmethacrylateUnchanged
Acrylonitrile-butadiene-styrene-copolymerUnchanged
PolyamidesUnchanged
PolyvinylchlorideUnchanged
Acetal copolymerUnchanged
PolycarbonateUnchanged

Does Fomblin® PFPE Have Antirust Properties?

Perfluoropolyethers are characterized by somewhat low anti-rust properties. Solvay Specialty Polymers has developed a family of proprietary soluble anti-rust additives. These additives, Fomblin® DA305 and Fomblin® DA306/VAC, comes from the same technological platform as Fomblin® PFPE oils. They present functional groups which allow them to interact with the surfaces establishing durable bonds and consequently improving surface protection. Fomblin® DA305 is specially designed to work with Fomblin® PFPE based greases, while Fomblin® DA306/VAC has been designed for oils. The availability of additivated Fomblin® PFPE oils widens the range of applications for perfluorinated lubricants in fields requiring improved anti-rust properties.

How Do I Select a Grade for a Particular Application?

Our technical service team is at your disposition to help you select the right Fomblin® PFPE product for your application. Don’t overlook basic details that can have a significant impact on the resulting lubricant’s performance. You should provide us with as much information as possible to help us identifying the lubricant best suited to your needs.

The key requirement for selecting the proper lubricant is the base oil viscosity. In order to select the appropriate viscosity, we need to gather information about your application, including:

  • Operating speed (variable or fixed)
  • Specific type of friction (e. g., sliding or rolling)
  • Load and the environmental conditions
  • Industry standards

If your equipment is lubricated for life, synthetic oils are recommended for their many benefits, including:

  • Low/high temperature viscosity performance combined with decreased evaporative loss
  • Reduced friction and reduced wear
  • Improved efficiency and chemical stability
  • Resistance to oil sludge problems and extended drain intervals

Is Fomblin® PFPE Food Grade Approved?

Fomblin® M03, M15, M30, M60, Fomblin® Y04, Y06, Y25, Y45, YR, YR1800, Y LVAC 25/6 are all approved with the intended use described below:

  • H1: General, incidental contact
  • H2: General, no contact
  • HX-1: Ingredients for use in H1 lubricants, incidental contact
  • HX-2: Ingredients for use in H2 lubricants, no contact

Fomblin® M15/RP, M30/RP, M60/RP, Fomblinv Y25/RP, YR1800/RP are all approved with the intended use described below:

  • H1: General, incidental contact
  • H2: General, no contact

Is Fomblin® PFPE Factory Mutual Approved?

Fomblin® PFPE lubricants are approved according to FM 6930 standard for flammability classification of industrial fluids. This standard states the flammability classification rating for industrial fluids intended for, but not limited to, lubricants, hydraulic power transmission, turbine governor control, transfer insulation and cooling.

Fomblin-PFPE-FM-certificate

Is Fomblin® PFPE Safe for Oxygen Service?

Yes. Bundesanstalt fur Materialprüfung, Berlin (BAM) has approved the use of Fomblin® PFPE fluids in the presence of oxygen. Additionally, the National Aeronautics and Space Administration (NASA) and the Naval Ship Engineering Center of the US Navy have both approved the use of Fomblin® PFPE fluids in liquid oxygen applications. Fomblin® LC grades are special fluids for oxygen handling and lubrication of oxygen pumps and compressors. Fomblin® LOX are special fluids tailored for handling oxygen when a low vapor pressure is required. Different grades having different viscosity/temperature relationships are available. Temperature and pressure limits of oxygen with Fomblin® PFPE are available upon request.