Tecnoflon® N 535 is a low viscosity fluoroelastomer copolymer. Tecnoflon® N 535 is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® N 535 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems. 
Some of the unique properties of Tecnoflon® N 535 are: 
- Excellent compression set 
- Lack of mould fouling 
- Superior extrusion behaviour 
- Superior mould flow 
- Excellent mould release 
Tecnoflon® N 535 can be used for injection and transfer moulding of O-rings, gaskets and seals. Tecnoflon® N 535 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon® N 535 can be dispersed in solvents for coating applications. Tecnoflon® N 535 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods. 

Identity

  • Global Business Unit
    Specialty Polymers
  • Brand
    TECNOFLON® FKM
  • Synonyms

    Fluorelastomer

Markets

Segments Applications
Industrial Equipment Industrial Equipment Parts | Pipes, Pumps, Fittings & Valves

Chemical categories

Chemical category Chemical family Chemical product
Specialty Polymers Fluorinated Elastomers FKM & PFR FFKM (Fluoroelastomer)

Region of commercial availability

  • Europe / Middle East / Africa
  • North America

Download documentation for Tecnoflon® N 535