Results (37)
Tecnoflon® FOR 210 is a very low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 210 is mainly intended for blending with other polymers of the Tecnoflon® family to achieve the desired viscosity. Tecnoflon® FOR 210 was developed with a new curing system that improves the physical properties of the finished product. Processing characteristics such as flow and scorch safety are also enhanced. Tecnoflon® FOR 210 is well suited for applications were superior flow, mold release and excellent compression set are required.
Some of the basic properties of Tecnoflon® FOR 210 are:
- Excellent scorch safety
- Superior mold flow
- Very good mold release
- Lack of mold fouling
- Low compression set
- Good extrusion behavior
Some of the basic properties of Tecnoflon® FOR 210 are:
- Excellent scorch safety
- Superior mold flow
- Very good mold release
- Lack of mold fouling
- Low compression set
- Good extrusion behavior
Tecnoflon® FOR 210 can be used for injection and transfer moulding of O-rings, gaskets, and seals. Tecnoflon® FOR 210 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers.
Tecnoflon® FOR 210 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Tecnoflon® FOR 210 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® N 215/U is a very low viscosity fluoroelastomer copolymer. Tecnoflon® N 215/U is intended for blending with other polymers of the Tecnoflon® family to achieve the desired viscosity. It is also intended for high concentration solution applications, such as dip coated items, fabric coatings and spray coating. Tecnoflon® N 215/U can be mixed in the same way as all the other Tecnoflon® grades and can be used in any application requiring either very low compound viscosity or “low viscosity”, highly loaded high hardness compounds. Tecnoflon® N 215/U does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems.
Some of the unique properties of Tecnoflon® N 215/U are:
Solution applications
- Excellent pot life
- Very low Brookfield viscosity
- Excellent adhesion to substrates
Some of the unique properties of Tecnoflon® N 215/U are:
Solution applications
- Excellent pot life
- Very low Brookfield viscosity
- Excellent adhesion to substrates
Dry applications
- Superior mould flow
- Low compound viscosity
- Good compression set
- Superior mould flow
- Low compound viscosity
- Good compression set
Tecnoflon® N 215/U can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon® N 215/U can be dispersed in solvents for coating applications. Finished goods can be produced by a variety of rubber processing methods.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Tecnoflon® FOR 4391 is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with high fluorine content (70% wt). Tecnoflon® FOR 4391 is designed for applications requiring outstanding fuel and chemical resistance.
Some of the basic properties of Tecnoflon® FOR 4391 are:
- Good scorch safety
- Reduced mold fouling
- Excellent mold release
- Excellent resistance to fuels
- Very good heat resistance
- Very good compression set
Some of the basic properties of Tecnoflon® FOR 4391 are:
- Good scorch safety
- Reduced mold fouling
- Excellent mold release
- Excellent resistance to fuels
- Very good heat resistance
- Very good compression set
Tecnoflon® FOR 4391 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® FOR 4391 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Tecnoflon® PL 455 is a new generation low temperature peroxide curable low viscosity fluoroelastomer with 64% wt fluorine content. Tecnoflon® PL 455 exhibits excellent low temperature flexibility (TR10 = –30°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles.
Some of the basic properties of Tecnoflon® PL 455 are:
- Excellent low temperature flexibility
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
Some of the basic properties of Tecnoflon® PL 455 are:
- Excellent low temperature flexibility
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
Tecnoflon® PL 455 can be used for injection, injectioncompression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 455 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® PL 455 be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® P 457 is a low viscosity, medium fluorine (67%), peroxide curable fluoroelastomer. Tecnoflon® P 457 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability, optimum compression set and good flexibility at low temperatures. Tecnoflon® P 457 can be cross-linked using organic peroxides in conjunction with a coagent. Tecnoflon® P 457 is a lower viscosity version of Tecnoflon® P 757: please refer to Tecnoflon® P 757 Technical Data Sheet for data on chemical resistance.
Some of the basic properties of Tecnoflon® P 457 are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance
- Good stress relaxation
- Good metal bonding
- Good low temperature performance
Some of the basic properties of Tecnoflon® P 457 are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance
- Good stress relaxation
- Good metal bonding
- Good low temperature performance
Tecnoflon® P 457 can be used for injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 457 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® P 457 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Tecnoflon® PL 458 is a new generation low post cure peroxide curable fluoroelastomer. Tecnoflon® PL 458 exhibits both excellent low temperature flexibility (TR10 = –24°C) and an outstanding resistance to a variety of chemicals. As all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles.
Some of the basic properties of Tecnoflon® PL 458 are:
- Excellent low temperature flexibility
- Low volume swell in methanol-based fuels
- Low post cure
- Superior mould flow
- Lack of mould fouling
- Excellent mould release
Some of the basic properties of Tecnoflon® PL 458 are:
- Excellent low temperature flexibility
- Low volume swell in methanol-based fuels
- Low post cure
- Superior mould flow
- Lack of mould fouling
- Excellent mould release
Tecnoflon® PL 458 can be used for injection, compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 458 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® PL 458 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® P 459 is a low viscosity, high fluorine (70%), peroxide curable fluoroelastomer. Tecnoflon® P 459 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability and optimum compression set. Tecnoflon® P 459 can be cross-linked using organic peroxides in conjunction with a co-agent. Tecnoflon® P 459 is a lower viscosity version of Tecnoflon® P 959: please refer to Tecnoflon® P 959 Technical data sheet for data on chemical resistance.
Some of the basic properties of Tecnoflon® P 459 are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance
- Alcohol containing fuels
- Steam
- Fluids containing amine additives
Some of the basic properties of Tecnoflon® P 459 are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance
- Alcohol containing fuels
- Steam
- Fluids containing amine additives
Tecnoflon® P 459 can be used for injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 459 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® P 459 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® FOR 50HS is a low viscosity cure incorporated copolymer, based on our breakthrough technology on bisphenol curable fluoroelastomers. Tecnoflon® FOR 50HS can be compounded to meet all the major fluoroelastomer specifications with only a 1 hour post cure and without using Calcium Hydroxide. Tecnoflon® FOR 50HS is well suited for all applications requiring superior flow, mould release, and excellent compression set.
Some of the unique properties of Tecnoflon® FOR 50HS are:
- Low post cure time of 1 hour
- Lower post cure temperatures
- Curable without Calcium Hydroxide
- Excellent mould release
- Lack of mould fouling
- Lower compound viscosity
- Good scorch safety
- Fast cure rate
Some of the unique properties of Tecnoflon® FOR 50HS are:
- Low post cure time of 1 hour
- Lower post cure temperatures
- Curable without Calcium Hydroxide
- Excellent mould release
- Lack of mould fouling
- Lower compound viscosity
- Good scorch safety
- Fast cure rate
Tecnoflon® FOR 50HS can be used for injection and transfer moulding of O-rings, gaskets and seals. Tecnoflon® FOR 50HS can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 50HS can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Tecnoflon® N 535 is a low viscosity fluoroelastomer copolymer. Tecnoflon® N 535 is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® N 535 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems.
Some of the unique properties of Tecnoflon® N 535 are:
- Excellent compression set
- Lack of mould fouling
- Superior extrusion behaviour
- Superior mould flow
- Excellent mould release
Some of the unique properties of Tecnoflon® N 535 are:
- Excellent compression set
- Lack of mould fouling
- Superior extrusion behaviour
- Superior mould flow
- Excellent mould release
Tecnoflon® N 535 can be used for injection and transfer moulding of O-rings, gaskets and seals. Tecnoflon® N 535 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon® N 535 can be dispersed in solvents for coating applications. Tecnoflon® N 535 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® FOR 5351 is a low viscosity cure incorporated fluoroelastomer copolymer. This grade has excellent flow and good compression set. Tecnoflon® FOR 5351 can be used for molded items with complicated shapes which require a very good hot tear resistance for part removal.
Some of the basic properties of Tecnoflon® FOR 5351 are:
- Very fast cure rate
- Very good scorch safety
- Superior mold flow
- Excellent mold release
- Lack of mold fouling
- Low compression set
- High elongation
- Excellent hot tear strength
Some of the basic properties of Tecnoflon® FOR 5351 are:
- Very fast cure rate
- Very good scorch safety
- Superior mold flow
- Excellent mold release
- Lack of mold fouling
- Low compression set
- High elongation
- Excellent hot tear strength
Tecnoflon® FOR 5351 can be used for injection and transfer moulding of gaskets and seals. Tecnoflon® FOR 5351 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 5351 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Tecnoflon® FOR 5351/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade has excellent flow and good compression set. Tecnoflon® FOR 5351/U can be used for molded items with complicated shapes which require a very good hot tear resistance for part removal.
Some of the basic properties of Tecnoflon® FOR 5351/U are:
- Very fast cure rate
- Very good scorch safety
- Superior mold flow
- Excellent mold release
- Lack of mold fouling
- Low compression set
- High elongation
- Excellent hot tear strength
Some of the basic properties of Tecnoflon® FOR 5351/U are:
- Very fast cure rate
- Very good scorch safety
- Superior mold flow
- Excellent mold release
- Lack of mold fouling
- Low compression set
- High elongation
- Excellent hot tear strength
Tecnoflon® FOR 5351/U can be used for injection and transfer moulding of gaskets and seals. Tecnoflon® FOR 5351/U can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 5351/U can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® FOR 5361 is a low viscosity cure incorporated fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® FOR 5361 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers.
Some of the basic properties of Tecnoflon® FOR 5361 are:
- Improved low temperature performance
- Good chemical resistance
- Good heat resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Tecnoflon® FOR 5361 can be used for injection, compression and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® FOR 5361 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 5361 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some of the basic properties of Tecnoflon® FOR 5361 are:
- Improved low temperature performance
- Good chemical resistance
- Good heat resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Tecnoflon® FOR 5361 can be used for injection, compression and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® FOR 5361 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 5361 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® FOR 5381 is a low viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 5381 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. Tecnoflon® FOR 5381 contains proprietary cure system and special process aid providing superior processability for fast cycles and scorch safety.
Some of the basic properties of Tecnoflon® FOR 5381 are:
- Very good processability
- Excellent chemical resistance
- Low compression set
- Good heat resistance
Tecnoflon® FOR 5381 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. Tecnoflon® FOR 5381 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 5381 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some of the basic properties of Tecnoflon® FOR 5381 are:
- Very good processability
- Excellent chemical resistance
- Low compression set
- Good heat resistance
Tecnoflon® FOR 5381 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. Tecnoflon® FOR 5381 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 5381 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® FOR 539 is a low viscosity cure incorporated fluoroelastomer copolymer. This grade is especially suited for injection molding of O-rings and sealing components which must meet demanding specifications. Tecnoflon® FOR 539 contains a proprietary cure system and a special molecular weight distribution providing superior processability. It has been particularly designed to offer improved characteristics such as flow, mold release, scorch safety, no fouling and faster cycles at a wide range of molding temperatures.
Some of the basic properties of Tecnoflon® FOR 539 are:
- Outstanding flow ability
- Low viscosity
- Improved scorch safety
- No mould fouling
Some of the basic properties of Tecnoflon® FOR 539 are:
- Outstanding flow ability
- Low viscosity
- Improved scorch safety
- No mould fouling
Tecnoflon® FOR 539 can be used for injection and transfer moulding of O-rings, gaskets, and seals. Tecnoflon® FOR 539 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 539 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Tecnoflon® P 549L is a low viscosity, high fluorine (70%), peroxide curable fluoroelastomer. Tecnoflon® P 549L exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability. Tecnoflon® P 549L can be cross-linked using organic peroxides in conjunction with a co-agent.
Some of the basic properties of Tecnoflon® P 549L are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance especially in:
Some of the basic properties of Tecnoflon® P 549L are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance especially in:
Alcohol containing fuels
Steam
Fluids containing amine additives
Tecnoflon® P 549L can be used for injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 549L can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® P 549L can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
Steam
Fluids containing amine additives
Tecnoflon® P 549L can be used for injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 549L can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® P 549L can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Tecnoflon® PL 557 is a new generation low temperature peroxide curable fluoroelastomer with 65.5% wt fluorine content. Tecnoflon® PL 557 exhibits excellent low temperature flexibility (TR10 = –29°C), close to Tecnoflon® PL 455, but with improved chemical resistance and permeability. Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles.
Some of the basic properties of Tecnoflon® PL 557 are:
- Excellent low temperature flexibility
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
Some of the basic properties of Tecnoflon® PL 557 are:
- Excellent low temperature flexibility
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
Tecnoflon® PL 557 can be used for injection, injectioncompression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 557 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® PL 557 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting.
- Europe / Middle East / Africa
- North America
Tecnoflon® FOR 60K is a medium-low viscosity cure incorporated fluoroelastomer copolymer. This grade is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 60K greatly reduces the reject rate due to adhesion problems.
Some of the basic properties of Tecnoflon® FOR 60K are:
- Superior bonding to metal
- Very good scorch safety
- Superior mold flow
- Lack of mold fouling
- Excellent hot tear resistance
- Excellent mold release
Tecnoflon® FOR 60K can be used for injection, compression, and transfer moulding of gaskets and seals. Tecnoflon® FOR 60K can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 60K can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some of the basic properties of Tecnoflon® FOR 60K are:
- Superior bonding to metal
- Very good scorch safety
- Superior mold flow
- Lack of mold fouling
- Excellent hot tear resistance
- Excellent mold release
Tecnoflon® FOR 60K can be used for injection, compression, and transfer moulding of gaskets and seals. Tecnoflon® FOR 60K can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 60K can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® T 636 is a medium-low viscosity fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® T 636 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. Tecnoflon® T 636 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers.
Some of the basic properties of Tecnoflon® T 636 are:
- Good heat and chemical resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Some of the basic properties of Tecnoflon® T 636 are:
- Good heat and chemical resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Tecnoflon® T 636 can be used for compression, injection and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® T 636 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® T 636 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® T 636/L is a low viscosity fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® T 636/L does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. Tecnoflon® T 636/L is a lower viscosity version of Tecnoflon® T 636: please refer to Tecnoflon® T 636 Technical data sheet for data on chemical resistance: Tecnoflon® T 636/L exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers.
Some of the basic properties of Tecnoflon® 636/L are:
- Improved low temperature performance
- Good heat and chemical resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Some of the basic properties of Tecnoflon® 636/L are:
- Improved low temperature performance
- Good heat and chemical resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Tecnoflon® T 636/L can be used for compression, injection and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® T 636/L can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® T 636/L can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
- Europe / Middle East / Africa
- North America
Tecnoflon® L 636 is a medium-low viscosity fluoroelastomer terpolymer with 66% fluorine content, designed to provide improved low temperature characteristics. Tecnoflon® L 636 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. Tecnoflon® L 636 is especially suited for injection moulding of O-rings and sealing components which must meet demanding specifications. Tecnoflon® L 636 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers.
Some of the basic properties of Tecnoflon® L 636 are:
- Improved low temperature performance
- Good heat and chemical resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Tecnoflon® L 636 can be used for compression, injection and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® L 636 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® L 636 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting.
Some of the basic properties of Tecnoflon® L 636 are:
- Improved low temperature performance
- Good heat and chemical resistance
- Very low compression set
- Excellent mould release
- Lack of mould fouling
- Superior mould flow
Tecnoflon® L 636 can be used for compression, injection and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® L 636 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® L 636 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting.
- Europe / Middle East / Africa
- North America