Search

This product is a selective collector for nickel and copper-nickel ores. A key feature is its effectiveness over a variety of ore types. It can be used on its own—giving maximum selectivity vs. pyrrhotite—or in conjunction with xanthate—in which case it can be used to increase nickel recovery and significantly reduce xanthate requirements. This product is also suited for use in lower pH circuits.

This product is a highly versatile collector that can be used in many flotation processes. It supports selective copper flotation in copper-nickel sequential flotation, as a bulk collector for copper-nickel flotation or to enhance copper flotation in the copper-nickel separation stage.

This product is a highly versatile collector that is most often used as a secondary collector in bulk copper-nickel flotation or for selective copper flotation in copper-nickel sequential flotation. It can also be used to enhance discrimination against nickel and iron sulfides in copper-nickel separation stages.

This collector exhibits selectivity against pyrrhotite while maintaining nickel recovery. It can be used on its own or in conjunction with xanthate, in which case it can assist in increasing nickel recovery and reducing xanthate requirements. Given its stability, this product is particularly well- suited for use in lower pH circuits, such as in the processing of some ultramafic ores.

AERODRI® 100 series dewatering aids are used to reduce cake moisture in the filtration of mineral slurries, such as sulfide flotation concentrates, iron ore concentrates and coal concentrates and tailings and alumina trihydrate in the Bayer process.

AERODRI® 100 series dewatering aids are used to reduce cake moisture in the filtration of mineral slurries, such as sulfide flotation concentrates, iron ore concentrates and coal concentrates and tailings and alumina trihydrate in the Bayer process.

AERODRI® 100 series dewatering aids are used to reduce cake moisture in the filtration of mineral slurries, such as sulfide flotation concentrates, iron ore concentrates and coal concentrates and tailings and alumina trihydrate in the Bayer process.

Spray adhesive - Ideally suited to bonding applications Features and Benefits: A repositionable, high strength adhesive spray compatible with gelcoat, barrier-coat, glass fiber matting and fiberglass laminates. Fully compatible with polyester and vinylester resins. Contains hard synthetic resins and natural modified resins. Does not compromise the mechanical performance of laminates such as the interlaminar adhesion between the different layers of a laminate. Designed to not compromise or inhibit the correct polymerization of resins. Standard version contains a blue colorant which makes it possible to assess and regulate the quantity of Aerofix 3 applied, with the color disappearing during polymerization. (Also available in transparent or red color) Total solids (without propellant) is 60-64%

Selective primary and secondary Cu sulfide flotation collector.

Selective primary and secondary Cu sulfide flotation collector.

AEROGRIP
Adhesive - Ideally suited to aerospace applications

Features and Benefits 

• AEROGRIP has been developed as a method of fixing non-woven breather fabrics and woven peel plies, to vertical surfaces where standard flashtapes do not offer sufficient adhesion. 
• AEROGRIP holds these materials in place due to a unique series of peaks that are moulded into the surface of the tape. 
• Self-adhesive

AeroPaste® 1006 is a two-part, low-temperature-curing paste adhesive designed for out-of-autoclave structural bonding and rapid assembly applications. AeroPaste®1006 paste adhesive provides high strength, high toughness and excellent hot/wet properties with flexible curing schedules and ease of use. Typical applications for AeroPaste® 1006 include structural bonding of metals and composites, as well as repair applications. Features and Benefits: Service temperature of 250°F (121°C) dry and 180°F (82°C) hot/wet Good combination of shear and peel properties Vertical slump resistant and designed for automated dispensing High glue line thickness tolerance

AEROPHINE 3418A promoter is a unique, phosphine-based collector originally developed for the flotation of copper and activated zinc minerals and now recognized for its selective properties on complex, polymetallic and massive sulfide ores. AEROPHINE 3418A exhibits strength yet, selectivity against iron sulfides, non-activated sphalerite and penalty elements.

Peel ply,release film and breather fabric bonded together in a single product to reduce labour time,working up to 356 °F (180 °C). Ideal for manufacture of large component parts delivering significant labour savings.

Peel ply,release film and breather fabric bonded together in a single product to reduce labour time,working up to 248 °F (120 °C). Ideal for manufacture of large component parts delivering significant labour savings.