Technological advancements in electrification

Our electrification solutions meet the highest requirements in terms of safety and chemical resistance, addressing the needs of the entire battery system.

Batteries with higher energy density, greater power and lower cost are vital for the future of electromobility. Our solutions and technologies include fluorinated electrolyte additives, salts, binders and separators which improve the performance of the new generation of Li-Ion batteries, offer higher stability and allow batteries to work at higher voltages while increasing range and reducing costs.

Our high-performance materials also answer the demands of other electrification applications such as electrical and electronics, data transmission, as well as wires and cables.

Woman standing front electric vehicle

Product portfolio for electrification segment

Our solutions and technologies include fluorinated electrolyte additives, salts, binders and separators, which improve the performance of the next generation of Li-Ion batteries

Access catalog

Our products for electrification (67)

Chemical category
PTFE (Polytetrafluoroethylene)
Algoflon® D 1610 F is a PFOA-free white aqueous PTFE dispersion. It is designed for additivation of plastics and is particularly recommended for use as anti-…
Product functions: Chemical Resistant, High Heat Resistance, Low Friction
Chemical category
PTFE (Polytetrafluoroethylene)
Algoflon® F 5 FT is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in part
Product functions: Chemical Resistant
Chemical category
PTFE (Polytetrafluoroethylene)
Algoflon® F 5 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for filled grades and in particular is recomme
Product functions: Chemical Resistant
Chemical category
PTFE (Polytetrafluoroethylene)
Algoflon® F 7 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for normal compression molding and in particul
Product functions: Chemical Resistant
Chemical category
PPA (Polyphthalamide)
60% glass fiber, highest modulus, fast cycle time, hot-water molds, heat stabilized, lubricated
Product functions: Chemical Resistant, Creep Resistant, Fast Molding Cycle, Good Dimensional Stability, Good Toughness, Heat Stabilized, High Heat Resistance, High Strength, Hot Water Moldability, Low CLTE, Lubricated, Ultra High Stiffness
Chemical category
PPA (Polyphthalamide)
30% glass fiber for modern Auto E/E environments
Product functions: Chemical Resistant, Creep Resistant, Good Dimensional Stability, Good Glycol Resistance, Good Stiffness, High Heat Resistance, High Stiffness, High Strength, High Temperature Strength, Low Moisture Absorption, Non-Corrosive
Chemical category
PPA (Polyphthalamide)
35% glass fiber for modern Auto E/E environments
Product functions: Chemical Resistant, Creep Resistant, Good Dimensional Stability, Good Glycol Resistance, Good Stiffness, High Heat Resistance, High Stiffness, High Strength, High Temperature Strength, Low Moisture Absorption
Chemical category
PPA (Polyphthalamide)
50% glass fiber for modern Auto E/E environments
Product functions: Chemical Resistant, Creep Resistant, Good Dimensional Stability, Good Glycol Resistance, Good Stiffness, High Heat Resistance, High Stiffness, High Strength, High Temperature Strength, Low Moisture Absorption, Non-Corrosive
Chemical category
PPA (Polyphthalamide)
33% glass fiber, flame retardant, high flow, hot-water molds
Product functions: Chemical Resistant, Flame Retardant, Good Dimensional Stability, Good Electrical Properties, Good Stiffness, High Flow, High Strength, Hot Water Moldability
Chemical category
PPA (Polyphthalamide)
45% glass fiber, flame retardant, high flow, hot-water molds
Product functions: Chemical Resistant, Flame Retardant, Good Dimensional Stability, Good Electrical Properties, Good Stiffness, High Flow, High Strength, Hot Water Moldability
Chemical category
PPA (Polyphthalamide)
33% glass fiber, high flow, fast cycle time, hot-water molds, lubricated
Product functions: Chemical Resistant, Creep Resistant, Fast Molding Cycle, Good Dimensional Stability, Good Stiffness, High Flow, High Stiffness, High Strength, Hot Water Moldability, Low Moisture Absorption, Lubricated
Chemical category
PFSA (Perfluorosulfonic acid)
Aquivion® E87-05 is a perfluorosulfonic acid ionomer membrane that exhibits an Equivalent Weight (EW) of 870 g/eq. Nominal thickness is 50 microns.  Aquivion…
Chemical category
PAEK (Polyaryletherketone)
Unfilled for extrusion of ultra-thin films
Product functions: Chemical Resistant, Ductile, Fatigue Resistant, Flame Retardant, Good Dimensional Stability, Good Impact Resistance, High Heat Resistance
Chemical category
PAEK (Polyaryletherketone)
30% glass fiber, better chemical resistance than AV-621, high melt flow for injection molding
Product functions: Autoclave Sterilizable, Biocompatible, Chemical Resistant, E-beam Sterilizable, Ethylene Oxide Sterilizable, Fatigue Resistant, Flame Retardant, Good Dimensional Stability, Good Sterilizability, Heat Sterilizable, High Heat Resistance, High Stiffness, High Strength, Radiation (Gamma) Resistant, Radiation Sterilizable, Radiotranslucent, Steam Resistant, Steam Sterilizable
Chemical category
Proprietary
CYANOX® 1790 provides excellent processing and thermal stability, low color contribution and gas-fade resistance, outstanding resistance to extraction and disco
Chemical category
Proprietary
CYANOX® 2777 provides excellent processing and thermal stability, gas-fade resistance and low color development, discoloration resistant for all polyolefin appl
Chemical category
Proprietary
CYASORB THT® 7001EF provides superior UV protection for PP, PE and other polymers in applications for outdoor use, appliance housings and wire and cable jacketi
Chemical category
Proprietary
CYASORB® UV-3346 is based on hindered amine light stabilizer (HALS) chemistry, for use in general purpose applications
Chemical category
Proprietary
CYASORB® UV-3638F provides superior UV protection for PET fibers with low color and low volatility. CYASORB® UV-3638F has a very strong, broad UVA and UVB cover
Chemical category
ECTFE (Ethylene chlorotrifluoroethylene)
Halar® 3404DA is a filled, pearl-white semicrystalline melt processable fluorinated resin that is designed for electrostatic spray powder coatings and is par…
Product functions: Chemical Resistant, Corrosion Resistant, Food Contact Acceptable, Good Electrical Properties, Good Surface Finish, Good Thermal Stability, High Hardness, High Purity, Semi Crystalline