Enhanced design and connectivity

Sulfur Hexafluoride (SF6) is more and more used for the manufacturing of semiconductor devices such as IC (integrated circuits), flat panels, photovoltaic panels and MEMS (Micro-Electro-Mechanical-Systems). SF6 is applied in the above process as an etching gas. Due to the density and large molecule size, SF6 is a prefered etching gas in flat panel and MEMS production processes. Fluorinated gases, such as Sulfur Hexafluoride (SF6), play very important roles in the manufacturing of silicon devices. Gas purity is of key importance in this market segment, because any possibility of contamination has to be minimized. For this purpose Solvay offers N5.0 material (purity min. 99.999 %)

Algoflon® D 1610 F is a PFOA-free white aqueous PTFE dispersion. It is designed for additivation of plastics and is particularly recommended for use as anti-drip in flame retardant formulations. 
Algoflon® D 1610 F exhibits good wetting properties and shear stability. 
Main features of Algoflon® D 1610 F PTFE dispersion are:
- NO polyethoxylated alkylphenols 
- Very good wetting properties 
- Good shear stability 
- Excellent anti-dripping effect

Algoflon® F 5 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for filled grades and in particular is recommended for compounds with glass fiber since it allows good degassing during the sintering process. 
Main features of Algoflon® F 5 are: 
- Fine particle size 
- Narrow particle size distribution 
- Good blendability 
- Low porosity

Algoflon® F 5 FT is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in particular it is recommended for use with high filler content. Dark compounds based on Algoflon® F5 FT show optimum isotropic behaviour and very good longitudinal mechanical properties. 
Main features of Algoflon® F 5 FT are: 
- High bulk density 
- Optimum blendability 
- Isotropic properties
- Very good mechanical and electrical properties

Algoflon® F 7 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for normal compression molding and in particular molding of large billets for low thickness skived tapes down to 1 mil (25 µm). Algoflon® F 7 exhibits high bulk density, optimum isotropic behavior and very good mechanical and electrical properties. Main features of Algoflon® F 7 are: 
- Optimum mechanical properties 
- Optimum isotropic properties 
- Very good electrical properties 
- Excellent surface finishing 
- Excellent skivability

Algoflon® L203 a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micon sized primary particles. Algoflon® L203 can be de-agglomerated to sub-micron particle size by the application of shear, providing a better dispersion and distribution of the PTFE particles in the application. 
Algoflon® L203  is designed for use as additive in critical engineering and high end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants.
Main features of Algoflon® L203 include: 
- High specific surface area 
- Low molecular weight 
- Good blendability 
- Deagglomerated under shear
- Improved lubricity
- Reduced friction and wear

Algoflon® L206 a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micon sized primary particles. Algoflon® L206 can be de-agglomerated to sub-micron particle size by the application of shear, providing a better dispersion and distribution of the PTFE particles in the application. 
Algoflon® L206is designed for use as additive in critical engineering and high end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants.
Main features are: 
- High specific surface area
- Low molecular weight
- Good blendability
- Deaglomerated under shear
- Improved lubricity 
- Reduced friction and wear

Algoflon® S 121 is a white, granular, free-flowing PTFE powder that is designed for sheet molding and isostatic molding of complex shapes. The material has a large average particle size and high bulk density. Additionally, it shows good powder flow whilst maintaining high mechanical properties due to its soft particles. 
Main features of Algoflon® S 121 are: 
- Large particle size 
- High bulk density 
- Good flowability 
- Good mechanical properties

Amodel® A-4160 HSL resin is a 60% glass reinforced, heat stabilized polyphthalamide (PPA) which exhibits high modulus at elevated temperatures, a high heat deflection temperature and exceptional creep resistance. This material was designed for metal replacement applications. Its rapid crystallization and Good Flow characteristics allow shorter cycles for enhanced molding productivity. 

• Black: Amodel® A-4160 HSL BK324

Amodel® A-4422 LS resin is a 22% reinforced, light-stabilized, high-reflectivity white grade of polyphthalamide (PPA). The material exhibits high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance, and excellent electrical properties. 
Its rapid crystallization rate and high flow characteristics can result in shorter cycles, thereby enhancing molding productivity and lowering costs.

• White: Amodel® A-4422 LS WH118

Amodel® AFA-6133 V0 Z is a 33% glass-fiber reinforced, flame retardant grade of polyphthalamide (PPA) resin specifically formulated for connector applications requiring compatibility with both infrared and vapor phase soldering operations typically used by the electronics industry. Amodel® AFA-6133 V0 Z offers high flow and short molding cycles, thereby enhancing molding productivity and lowering costs. 

• Black: Amodel® AFA-6133 V0 Z BK 324

Amodel® AFA-6145 V0 Z is a 45% glass-fiber reinforced, flame retardant grade of polyphthalamide (PPA) resin specifically formulated for connector applications requiring compatibility with both infrared and vapor phase soldering operations typically used by the electronics industry. Amodel® AFA-6145 V0 Z offers high flow and short molding cycles, thereby enhancing molding productivity and lowering costs. 

• Black: Amodel® AFA-6145 V0 Z BK 324 

Amodel® HFFR-4133 is a 33% glass-reinforced, halogen-free, flame retardant polyphthalamide (PPA) resin which offers enhanced processing capabilities for electrical and electronic applications. This resin is rated V-0 by Underwriters Laboratories using the UL94 test and is hot-water moldable. It has high flow and a wide processing window and offers good surface appearance, especially for larger electrical components. This grade can withstand the demanding infrared reflow soldering process typically used in the electronics industry. It is well suited for connectors and other electrical devices requiring surface mount technology (SMT). 

• Natural: Amodel® HFFR-4133 NT
• Black: Amodel® HFFR-4133 BK 324

Amodel® HFZ A-4133 L polyphthalamide (PPA) is a 33% glass-reinforced, hot water moldable resin. Key properties include heat resistance, reduced outgassing and high strength and stiffness over a broad temperature range. It also displays low moisture absorption, excellent chemical resistance and excellent electrical properties. Amodel® HFZ A-4133 L resin is ideal for automotive electrical and electronic applications, including connectors, sockets, switches and sensors. It is also a good choice for under-hood enclosures that protect critical control systems such as anti-lock brakes, traction control, steering, electronic engine control, transmission and chassis control units. 

• Natural: Amodel® HFZ A-4133 L NT
• Black: Amodel® HFZ A-4133 L BK 324 

Aquivion® D72-25BS is a chemically-stabilized (denoted by the S-suffix) perfluorosulfonic acid (PFSA) ionomer dispersion that exhibits an Equivalent Weight (EW) of 720 g/eq. Polymer concentration is 25%. Solvent system is >99% water and is free of ethers. Aquivion® PFSA dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Solvay. The PFSA ionomer dispersions contain its acid form (-SO3H) and are available in various solvent systems, EWs and concentrations. These dispersions can be used to produce PEM fuel cell electrodes and electrochemical cell electrodes, to manufacture or repair ion exchange membranes, to produce super-acid catalysts, and for the surface treatment of PTFE membranes to improve wetting behavior. Please visit Aquivion.com for more information.

Aquivion® D79-25BS is a chemically-stabilized (denoted by S-suffix) perfluorosulfonic acid (PFSA) ionomer dispersion that exhibits an Equivalent Weight (EW) of 790 g/eq. Polymer concentration is 25%. Solvent system is >99% water and is free of ethers. Aquivion® PFSA dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Solvay. The PFSA ionomer dispersions contain its acid form (-SO3H) and are available in various solvent systems, EWs and concentrations. These dispersions can be used to produce PEM fuel cell electrodes and electrochemical cell electrodes, to manufacture or repair ion exchange membranes, to produce super-acid catalysts, and for the surface treatment of PTFE membranes to improve wetting behavior. Please visit Aquivion.com for more information.

AvaSpire® AV-651 GF30 is a 30% glass fiber reinforced polyaryletherketone (PAEK) that has been specifically formulated to provide higher mechanical strength and stiffness than unfilled AV-651 resin. This resin offers chemical resistance nearly equivalent to glass fiber-reinforced PEEK in most chemicals, with a lower heat deflection temperature. These properties make it well suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. 

• Beige: AvaSpire® AV-651 GF30 BG 20 

"The Alkaline Earth High Purity (HP) product line is characterized by specific chemical and physical properties which are strictly controlled in all steps of the production process guided by our total quality management. This makes these products the preferred choice by the electro ceramics industry for titanates production by all methods (solid state, oxalate, sol-gel, hydrothermal), by the structural ceramic industry and for specialty glass production. Barium Carbonate High Purity is available in several grades with different chemical purities, shapes and granulometry, all characterized by high reactivity and tightly controlled narrow particle size distribution. These products find their main application in the production of titanates used by the electronic industry for ceramic capacitors and PTC devices. BaCO3 HP BM020, the most advanced BaCO3 HP, tight control of the particle size and shape and very high surface area, for the cutting hedge applications"

"The Alkaline Earth High Purity (HP) product line is characterized by specific chemical and physical properties which are strictly controlled in all steps of the production process guided by our total quality management. This makes these products the preferred choice by the electro ceramics industry for titanates production by all methods (solid state, oxalate, sol-gel, hydrothermal), by the structural ceramic industry and for specialty glass production. Barium Carbonate High Purity is available in several grades with different chemical purities, shapes and granulometry, all characterized by high reactivity and tightly controlled narrow particle size distribution. These products find their main application in the production of titanates used by the electronic industry for ceramic capacitors and PTC devices. BaCO3 HP BM040, the advanced BaCO3 HP for the most advanced applications"