Industrial equipment

Acudel® 22000 is a modified polyphenylsulfone. It is a high-heat, high-performance resin formulation exhibiting very good hydrolytic stability, excellent resistance to acids and bases and good resistance to stress cracking under a broad range of chemical environments. In addition, Acudel® 22000 resin exhibits robust toughness and improved notch resistance compared to both Udel® polysulfone and Veradel® polyethersulfone, although slightly lower than that of neat Radel® polyphenylsulfone. In general, the performance profile of Acudel® 22000 resin falls between polysulfone and polyphenylsulfone. In addition to its high mechanical and thermal performance attributes, Acudel® 22000 resin also offers very good electrical properties over a broad temperature range as well as inherent flame retardancy. 

• Natural: Acudel® 22000 NT15 
• Black: Acudel® 22000 BK937

As the active component of Corrosive-Flux-Paste, AL-Flux 0726 contains a mixture of LiCl, NaCl, KCl, inorganic- and complex- fluorides. Organic carrier systems are used to prepare a wide range of pastes for the flame brazing of aluminium materials. Al-Flux 0726 Flux Paste is typically applied by dispensing and brushing for flame brazing. No component mixing is required. Products are supplied as ready to use products, requiring stirring only.

Algoflon® D 1614 F is a PFOA-free white aqueous PTFE dispersion. It is designed for conventional impregnation processes and is particularly recommended for production of impregnated woven packings and yarns. 
Algoflon® D 1614 F exhibits good wetting properties and shear stability. Algoflon® D 1614 F has good film forming behavior and is well-suited to produce final items with high gloss. Main features of Algoflon® D 1614 F PTFE dispersion are: 
- NO polyethoxylated alkylphenols 
- Very good wetting properties 
- Good shear stability

Algoflon® D 2711 F is a PFOA-free white aqueous PTFE dispersion. It is designed for coagulation processes and is particularly recommended for co-coagulation with fillers in the production of mechanical components like bearings and seals. 
Algoflon® D 2711 F contains an anionic non-fluorinated dispersant to provide storage and handling stability, yet it can be easily coagulated with appropriate ingredients and/or fillers into a wet, processable mush. 
Main features of Algoflon® D 2711 F PTFE dispersion are: 
- Very good handling and storage stability 
- Suitability for processing with a vast range of fillers

Algoflon® D 3511 F is a white aqueous PTFE dispersion. It is designed mainly for coating processes but can also be used for impregnation. Algoflon® D 3511 F has superior film forming behavior and is well-suited to produce final items with excellent gloss. 
Algoflon® D 3511 F exhibits good wetting properties and high shear stability. 
Main features of Algoflon® D 3511 F PTFE dispersion are: 
- NO polyethoxylated alkylphenols 
- Superior film building behavior 
- Excellent surface finishing and gloss 
- High shear stability

Algoflon® F 5 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for filled grades and in particular is recommended for compounds with glass fiber since it allows good degassing during the sintering process. 
Main features of Algoflon® F 5 are: 
- Fine particle size 
- Narrow particle size distribution 
- Good blendability 
- Low porosity

Algoflon® F 5 FT is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in particular it is recommended for use with high filler content. Dark compounds based on Algoflon® F5 FT show optimum isotropic behaviour and very good longitudinal mechanical properties. 
Main features of Algoflon® F 5 FT are: 
- High bulk density 
- Optimum blendability 
- Isotropic properties
- Very good mechanical and electrical properties

Algoflon® F 7 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for normal compression molding and in particular molding of large billets for low thickness skived tapes down to 1 mil (25 µm). Algoflon® F 7 exhibits high bulk density, optimum isotropic behavior and very good mechanical and electrical properties. Main features of Algoflon® F 7 are: 
- Optimum mechanical properties 
- Optimum isotropic properties 
- Very good electrical properties 
- Excellent surface finishing 
- Excellent skivability

Algoflon® L203 a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micon sized primary particles. Algoflon® L203 can be de-agglomerated to sub-micron particle size by the application of shear, providing a better dispersion and distribution of the PTFE particles in the application. 
Algoflon® L203  is designed for use as additive in critical engineering and high end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants.
Main features of Algoflon® L203 include: 
- High specific surface area 
- Low molecular weight 
- Good blendability 
- Deagglomerated under shear
- Improved lubricity
- Reduced friction and wear

Algoflon® L206 a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micon sized primary particles. Algoflon® L206 can be de-agglomerated to sub-micron particle size by the application of shear, providing a better dispersion and distribution of the PTFE particles in the application. 
Algoflon® L206is designed for use as additive in critical engineering and high end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants.
Main features are: 
- High specific surface area
- Low molecular weight
- Good blendability
- Deaglomerated under shear
- Improved lubricity 
- Reduced friction and wear

Algoflon® S 121 is a white, granular, free-flowing PTFE powder that is designed for sheet molding and isostatic molding of complex shapes. The material has a large average particle size and high bulk density. Additionally, it shows good powder flow whilst maintaining high mechanical properties due to its soft particles. 
Main features of Algoflon® S 121 are: 
- Large particle size 
- High bulk density 
- Good flowability 
- Good mechanical properties

Alve-One® foaming solutions are based on a portfolio of ADCA-free chemical blowing agents that may be tailored to the needs of the thermoplastics, elastomers and PVC (rigid and flexible) producers. The solutions offer specific plastic's properties: insulation, strength, lightweight, cushioning, softness, appearance.

Aquivion® D83-24B is a perfluorosulfonic acid (PFSA) ionomer dispersion that exhibits an Equivalent Weight (EW) of 830 g/eq. Polymer concentration is 24%. Solvent system is >99% water and is free of ethers. Aquivion® PFSA dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Solvay. The PFSA ionomer dispersions contain its acid form (-SO3H) and are available in various solvent systems, EWs and concentrations. These dispersions can be used to produce PEM fuel cell electrodes and electrochemical cell electrodes, to manufacture or repair ion exchange membranes, to produce super-acid catalysts, and for the surface treatment of PTFE membranes to improve wetting behavior. Please visit Aquivion.com for more information.

AvaSpire® AV-621 is an unreinforced polyaryletherketone (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621 grade is the low melt flow (higher molecular weight) analogue of the medium flow grade AvaSpire® AV-651 that is tailored primarily for injection molding applications as well as film extrusion. AvaSpire® AV-621 resin is suited for a variety of processing methods including compression molding, stock shape extrusion, as well as injection molding. AV-621 has been formulated for applications requiring a balance of chemical resistance and mechanical strength along with good part aesthetics, thereby bridging the performance gaps within the ultra polymers space. These and other properties make this resin well-suited for applications in healthcare, transportation, semiconductor, electronics, chemical processing, and other industries. AvaSpire® AV-621 is easily fabricated using conventional thermoplastic melt processing techniques and standard equipment. The resin has a uniform opaque appearance with a beige color similar to that of PEEK. 

• Natural: AvaSpire® AV-621 NT

AvaSpire® AV-630 is an unreinforced polyaryletherketone (PAEK) developed as an alternative to low melt flow PEEK for the extrusion of ultra-thin films. Films with thicknesses as low as 0.2 mils (5 microns) can be successfully melt extruded out of AV-630 using conventional thermoplastics film extrusion equipment.
Films of AV-630 offer certain performance advantages over comparable PEEK film. These include improved toughness and ductility, a higher retention of mechanical integrity at temperatures above 150°C, better acceptance of adhesives and improved flame propagation resistance properties. Ultra-thin films (<15 microns thick) also exhibit a more flexible, less crinkly feel than that of PEEK films at comparable thicknesses. 
Sub-mil thick films produced from AV-630 can be utilized in a wide range of industrial applications. Typical applications include capacitors, electrical insulation, flexible circuitry substrates, composite film layers, specialty laminates, good flexibilities, liners and aerospace films, such a thermal acoustical insulation blanket bagging materials.

• Natural: AvaSpire® AV-630 NT

AvaSpire® AV-651 is an unreinforced polyaryletherketone (PAEK) that offers more ductility and impact strength than PEEK, with higher chemical and environmental stress cracking resistance than AvaSpire® AV-650. It has been specifically formulated for applications requiring a balance of chemical resistance and mechanical strength along with good part aesthetics, bridging the performance gaps within the ultra polymers space. 
These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. AvaSpire® AV-651 can be easily processed by typical injection molding and extrusion methods using conventional processing equipment. 

• Natural: AvaSpire® AV-651 NT 
• Black: AvaSpire® AV-651 BK 95

AvaSpire® AV-651 CF30 is a 30% carbon fiber reinforced version of AvaSpire® AV-651. This formulation offers some advantages relative to 30% carbon fiber reinforced PEEK which include better dimensional stability and warp resistance during injection molding. The AV-651 CF30 grade offers the highest strength, stiffness, and fatigue resistance of any AV-651-based grade. Furthermore, this resin generally retains most of the desirable ultra-performance attributes of carbon fiber reinforced PEEK. Those attributes include chemical resistance, fatigue resistance, and long term thermal oxidative stability.
The excellent balance of properties of AV-651 CF30 makes this grade well suited for a broad range of applications across a number of industries including healthcare, transportation, electronics, oil and gas, and chemical processing.
 This resin can be easily melt processed by injection molding using standard equipment. The melt processing behavior of AV-651 CF30 is overall very similar to that of 30% CF reinforced PEEK. While the resin can also be extruded, the lower melt flow AV-621 CF30 grade is considered more suited for extrusion applications while offering the same property profile as AV-651 CF30.

AvaSpire® AV-651 GF30 is a 30% glass fiber reinforced polyaryletherketone (PAEK) that has been specifically formulated to provide higher mechanical strength and stiffness than unfilled AV-651 resin. This resin offers chemical resistance nearly equivalent to glass fiber-reinforced PEEK in most chemicals, with a lower heat deflection temperature. These properties make it well suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. 

• Beige: AvaSpire® AV-651 GF30 BG 20 

AvaSpire® AV-722 is an unreinforced polyaryletherketone (PAEK) that offers improved economics relative to PEEK while retaining most of PEEK's key performance attributes. AV-722 resin has been formulated for applications requiring high chemical resistance and mechanical strength along with low moisture absorption and good barrier properties. These and other properties make this resin well-suited for applications in healthcare, transportation, electronics, chemical processing and other industries.

• Beige: AvaSpire® AV-722 BG 20