
Printing, ink & adhesives
Whether inks for traditional printing or polymers for 3D printing, we provide materials for the best performances.
Solvay's solvents and additives used for inks, thinners and adhesives in the printing industry take into account the latest HSE requirements.
We also provide dedicated polymer grades used in cutting edge 3D printing technologies. We have developed a new process that helps designers manufacture prototypes and small series of objects with complex geometries, combining the benefits of printing with high resistance reinforced materials.
Our products for printing, ink & adhesives (50)
APE-free nonionic emulsifier. An effective co-emulsifier in vinyl/acrylic, all acrylic and styrene/acrylic polymers.
- Asia / Pacific
- North America
APE-free nonionic emulsifier. Effective co-emulsifier in vinyl/acrylic, all acrylic and styrene/acrylic polymers.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
APE-free nonionic emulsifier. Effective as either a sole emulsifier or as a co-emulsifier in vinyl/acrylic, all acrylic and styrene/acrylic systems.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
APE-free nonionic emulsifier. Effective as either a sole emulsifier or a co-emulsifier in vinyl/acrylic, all acrylic and styrene/acrylic systems.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
It is a colorless and limpid liquid, non-corrosive, with a characteristic pleasant smell. It has low toxicity. It is miscible with the most common organic solvents and with water.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Algoflon® L203 R a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micron sized primary particles. Algoflon® L203 R can be de-agglomerated to sub-micron particle size by the application of shear, providing a better dispersion and distribution of the PTFE particles in the application.
Algoflon® L203 R is designed for use as additive in critical engineering and high end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants.
Main features of Algoflon® L203 R include:
- High specific surface area
- Low molecular weight
- Good blendability
- Deagglomerated under shear
- Improved lubricity
- Reduced friction and wear
Algoflon® L203 R is designed for use as additive in critical engineering and high end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants.
Main features of Algoflon® L203 R include:
- High specific surface area
- Low molecular weight
- Good blendability
- Deagglomerated under shear
- Improved lubricity
- Reduced friction and wear
- Asia / Pacific
- Europe / Middle East / Africa
- North America
Algoflon® L206 R a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micon sized primary particles. Algoflon® L206 R can be de-agglomerated to sub-micron particle size by the application of shear, providing a better dispersion and distribution of the PTFE particles in the application.
Algoflon® L206 R is designed for use as additive in critical engineering and high-end performance host materials such as thermoplastics, elastomers, coatings, inks, and lubricants.
Main features are:
- High specific surface area
- Low molecular weight
- Good blendability
- Deaglomerated under shear
- Improved lubricity
- Reduced friction and wear
Algoflon® L206 R is designed for use as additive in critical engineering and high-end performance host materials such as thermoplastics, elastomers, coatings, inks, and lubricants.
Main features are:
- High specific surface area
- Low molecular weight
- Good blendability
- Deaglomerated under shear
- Improved lubricity
- Reduced friction and wear
- Asia / Pacific
- Europe / Middle East / Africa
- North America
It is a colorless and clear liquid, non-corrosive, low volatility and low toxicity, slight odor. It is miscible in common organic solvents and water.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
AvaSpire® AV-621 is an unreinforced polyaryletherketone (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621 grade is the low melt flow (higher molecular weight) analogue of the medium flow grade AvaSpire® AV-651 that is tailored primarily for injection molding applications as well as film extrusion. AvaSpire® AV-621 resin is suited for a variety of processing methods including compression molding, stock shape extrusion, as well as injection molding. AV-621 has been formulated for applications requiring a balance of chemical resistance and mechanical strength along with good part aesthetics, thereby bridging the performance gaps within the ultra polymers space. These and other properties make this resin well-suited for applications in healthcare, transportation, semiconductor, electronics, chemical processing, and other industries. AvaSpire® AV-621 is easily fabricated using conventional thermoplastic melt processing techniques and standard equipment. The resin has a uniform opaque appearance with a beige color similar to that of PEEK.
- Natural: AvaSpire® AV-621 NT
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
AvaSpire® AV-630 is an unreinforced polyaryletherketone (PAEK) developed as an alternative to low melt flow PEEK for the extrusion of ultra-thin films. Films with thicknesses as low as 0.2 mils (5 microns) can be successfully melt extruded out of AV-630 using conventional thermoplastics film extrusion equipment.
Films of AV-630 offer certain performance advantages over comparable PEEK film. These include improved toughness and ductility, a higher retention of mechanical integrity at temperatures above 150°C, better acceptance of adhesives and improved flame propagation resistance properties. Ultra-thin films (<15 microns thick) also exhibit a more flexible, less crinkly feel than that of PEEK films at comparable thicknesses.
Sub-mil thick films produced from AV-630 can be utilized in a wide range of industrial applications. Typical applications include capacitors, electrical insulation, flexible circuitry substrates, composite film layers, specialty laminates, good flexibilities, liners and aerospace films, such a thermal acoustical insulation blanket bagging materials.
Films of AV-630 offer certain performance advantages over comparable PEEK film. These include improved toughness and ductility, a higher retention of mechanical integrity at temperatures above 150°C, better acceptance of adhesives and improved flame propagation resistance properties. Ultra-thin films (<15 microns thick) also exhibit a more flexible, less crinkly feel than that of PEEK films at comparable thicknesses.
Sub-mil thick films produced from AV-630 can be utilized in a wide range of industrial applications. Typical applications include capacitors, electrical insulation, flexible circuitry substrates, composite film layers, specialty laminates, good flexibilities, liners and aerospace films, such a thermal acoustical insulation blanket bagging materials.
- Natural: AvaSpire® AV-630 NT
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
AvaSpire® AV-651 CF30 is a 30% carbon fiber reinforced version of AvaSpire® AV-651. This formulation offers some advantages relative to 30% carbon fiber reinforced PEEK which include better dimensional stability and warp resistance during injection molding. The AV-651 CF30 grade offers the highest strength, stiffness, and fatigue resistance of any AV-651-based grade. Furthermore, this resin generally retains most of the desirable ultra-performance attributes of carbon fiber reinforced PEEK. Those attributes include chemical resistance, fatigue resistance, and long term thermal oxidative stability.
The excellent balance of properties of AV-651 CF30 makes this grade well suited for a broad range of applications across a number of industries including healthcare, transportation, electronics, oil and gas, and chemical processing.
This resin can be easily melt processed by injection molding using standard equipment. The melt processing behavior of AV-651 CF30 is overall very similar to that of 30% CF reinforced PEEK. While the resin can also be extruded, the lower melt flow AV-621 CF30 grade is considered more suited for extrusion applications while offering the same property profile as AV-651 CF30.
The excellent balance of properties of AV-651 CF30 makes this grade well suited for a broad range of applications across a number of industries including healthcare, transportation, electronics, oil and gas, and chemical processing.
This resin can be easily melt processed by injection molding using standard equipment. The melt processing behavior of AV-651 CF30 is overall very similar to that of 30% CF reinforced PEEK. While the resin can also be extruded, the lower melt flow AV-621 CF30 grade is considered more suited for extrusion applications while offering the same property profile as AV-651 CF30.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
AvaSpire® AV-722 is an unreinforced polyaryletherketone (PAEK) that offers improved economics relative to PEEK while retaining most of PEEK's key performance attributes. AV-722 resin has been formulated for applications requiring high chemical resistance and mechanical strength along with low moisture absorption and good barrier properties. These and other properties make this resin well-suited for applications in healthcare, transportation, electronics, chemical processing and other industries.
- Beige: AvaSpire® AV-722 BG 20
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
It is a colorless and limpid liquid, non-corrosive, with a characteristic pleasant non residual odor. It has low toxicity. It is miscible with hydrocarbons, esters, alcohols and ethers, and it has low water solubility.
- Latin America
CYASORB CYNERGY SOLUTIONS® L143-50X is a low viscosity, single product stabilization solution for excellent coating protection
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
CYASORB® UV-1164 provides excellent UV protection for PET backsheet films and outstanding UV durability for PC and PET through its excellent UV and heat stability combined with its good chemical resistance.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
CYASORB® UV-1164G provides excellent UV protection for PET backsheet films and outstanding UV durability for PC and PET through its excellent UV and heat stability combined with its good chemical resistance.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
CYASORB® UV-1164L provides excellent UV protection for PET backsheet films and outstanding UV durability for PC and PET through its excellent UV and heat stability combined with its good chemical resistance.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
It is a colorless and limpid liquid, non-corrosive, with a characteristic pleasant smell. It is miscible with the most common organic solvents and with water.
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
It is a colorless and limpid liquid, non-corrosive, with a characteristic pleasant non residual odor. It has low toxicity. It is miscible with hydrocarbons, esters, alcohols and ethers, and it has low water solubility
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America
Low viscosity copolymer for wire & cable applications
- Asia / Pacific
- Europe / Middle East / Africa
- North America
- Latin America