LTM®
LTM® (Low Temperature Molding) series structural and tooling prepregs and associated adhesives (LTA) provide excellent mechanical properties, and the benefits of low temperature cures and longer out life. LTM® products are generally used for large structures. Typical cure temperatures for LTM® prepregs and adhesives are in the range 20 to 80°C (68 to 176°F).
LTM®:
- Offers low temperature initial curing
- Allows for the use of low cost, low temperature master models.
- Produces high temperature capable tooling after additional free-standing post cure
LTM® Tooling products
Results (3)
Chemical category
Epoxy
LTM10 series tooling prepregs are low temperature curing epoxy resins systems
Product functions:
High Service Temperature (>150°C)
Chemical category
Epoxy
Low temperature, autoclave cure, epoxy tooling system. Minimum cure temperature (55°C/131°F). Out life at (21°C/70°F) 8 days. Maximum Tg after post-cure (210°C/
Product functions:
High Service Temperature (>150°C)
Chemical category
Epoxy
LTM® 350 Tooling PrepregsLTM® 350 is a low temperature curing epoxy based tooling system optimised for both a rapid initial cure and post cure cycles
Product functions:
High Service Temperature (>150°C)
LTM® Structural products
Results (3)
Chemical category
Cyanate ester
Low temperature cyanate ester system. Initial cure (70°C/158°F) for 20 hours. Out life at (21°C/70°F) 3 days. Max dry Tg after post-cure (330°C/626°F) | Good di
Product functions:
High Service Temperature (>150°C)
Chemical category
Epoxy
LTM® 26 SERIESLTM26 series prepregs are low to medium viscosity epoxy resin matrices formulated to cure at low initial cure temperatures.These pr
Product functions:
Medium Service Temperature (70°C to 150°C)
Chemical category
Epoxy
LTM® 45 SERIESLTM® 45 series prepregs consists of a range of low temperature curing epoxy matrix resins giving prepregs with elevated end use temperatu
Product functions:
High Service Temperature (>150°C)